click image to enlarge |
| £11.99 |
|
|
|
|
|
| Total: |
£11.99 |
|
|
|
|
|
Grate Paint Silk finish - Aerosol
What is it?
Grate Paint is a high temperature, corrosion resistant, one coat decorative finish. It is specially formulated for use on cast iron and steel. Most substrates including steel and its alloys can be coated successfully however; we recommend that each new substrate should be checked individually for its suitability.
Optimum corrosion and abrasion resistance may be achieved by oven curing although curing will take place during operation of the product or components.
A thin coating allows excellent heat transmission and is colour fast up to 350°C, when allowed to cure for 24 hours.
Caution
Content: Xylene
Haz class: Extremely flammable; harmful; harmful by inhalation and in contact with skin and eyes - Keep out of reach of children.
Pack size: 450ml aerosol
Delivery Charges
For our care products we have a small charge for delivery, the most you will pay is £5.50 for any amount of care products.
Delivery is normally within 2-3 days.
---
1 Item is £3.50
2 Items are £4.50
3 Items are £5
4 + Items are £5.50 |
|
Directions for use
1. Ensure surface to be treated is cool and any heat source is extinguished.
2. Remove all rust, scale, dirt, grease and check surface is dry.
3. Apply by brush or spray.
4. Agitate paint until well mixed.
5. Recommended thickness 22 microns ± 3 microns.
6. In practice this means apply in thin coats, allow to fully dry before applying next coat. Building up in layers this way gives maximum high temperature resistance.
7. Coverage approximately 7m²/Litre at 20 microns.
8. Use only Xylene thinners.
9. Touch dry in 2-3 hours at room temperature.
10. Oven cure - 20 minutes at 250°C metal temperature.
11. Adequate ventilation should be provided at all stages of the curing operation. |
